Materials calculator
Wood, Plastic & Panel Weight Calculator
Calculate wood, plywood, MDF, plastic, composite, glass, and other panel weight from size, thickness, quantity, and material density.
Calculate panel weight
Enter the panel dimensions, quantity, and material density.
Results
Total weight
19.63 lb
For the entered quantity and dimensions
- Material density
- 0.284 lb/in³
- Total surface area
- 16.06 ft²
- Total volume
- 69.12 in³
3D view · actual proportions
- L
- 48 in
- W
- 24 in
- t
- 0.06 in
Engineering material reference
Material densities for wood, plastic, and panels
Browse standard reference densities for wood, engineered panels, plastics, composites, glass, rubber, ceramics, and metals, or use a supplier-specific custom density.
| Material | Family | Common names | kg/m³ | lb/in³ |
|---|---|---|---|---|
| Aluminum 5052-H32 | Metal | — | 2,680 | 0.097 |
| Aluminum 6061-T6 | Metal | — | 2,720 | 0.098 |
| Aluminum 7075-T6 | Metal | — | 2,810 | 0.102 |
| Steel 1008 cold-rolled | Metal | — | 7,850 | 0.284 |
| Steel A36 HRPO | Metal | — | 7,861 | 0.284 |
| Galvanized steel G90 | Metal | — | 7,850 | 0.284 |
| Stainless steel 304-2B | Metal | — | 8,030 | 0.290 |
| Stainless steel 316 | Metal | — | 7,990 | 0.289 |
Quick answer
How this panel weight calculator works
Panel weight equals length multiplied by width, thickness, quantity, and material density. Search the material catalog for wood, engineered wood, plastic, composite, glass, rubber, or ceramic, or use a supplier’s custom density.
How to use the calculator
- 1Enter the finished panel length, width, thickness, and quantity.
- 2Select All materials and search for the nearest wood, MDF, plastic, composite, glass, or other panel material.
- 3Use Custom when the supplier publishes a product-specific density, especially for wood and engineered panels.
- 4Read total weight and review volume and surface area, then account separately for hardware, coatings, moisture, and cutouts.
Worked example
Full-size MDF panel
- Inputs
- One 48 × 96 × 0.750 in MDF panel using a representative density of 710 kg/m³.
- Result
- Estimated panel weight ≈ 88.7 lb.
The calculator converts the panel volume and multiplies it by the selected density. Real MDF density varies by product and manufacturer.
Common questions
What to know before using the result
- Can I calculate plywood or lumber weight?
- Yes. Use a listed wood density for a general estimate or enter the supplier’s density for a particular plywood, lumber, or engineered-wood product.
- Why does wood weight vary so much?
- Species, grade, moisture content, growth conditions, adhesives, veneers, and product construction all affect density. Supplier data is best when accuracy matters.
- Does the calculator work for plastic and composite panels?
- Yes. The material catalog includes many plastics, composites, glass, rubber, ceramics, and other nonmetal materials, and custom density supports unlisted products.
Formula
m = A × L × ρ
The selected flat or tube geometry gives volume. Rectangular tube includes rounded outside and concentric inside corners. Mass is volume multiplied by density.
Engineering references
Assumptions and limits
- Dimension-based estimates assume uniform thickness and nominal dimensions.
- Rectangular tube uses the entered outside radius and a concentric inside radius equal to outside radius minus wall thickness.
- Standard pipe, conduit, and copper-tube presets use nominal dimensions and representative material densities.
- Tube estimates exclude fittings, couplings, coatings, weld seams, and manufacturing tolerances.
- Surface area includes outer, inner, edge, and open-end faces where applicable.
- Published density values are representative; verify alloy certificates when tolerances matter.
Keep designing
Fabworks resources
Related calculators
Order Sheet Metal Parts
Upload a 2D DXF or 3D STEP file for an instant laser cutting quote. Quote in seconds, order in minutes, receive parts in days.
or drag and drop
STEP / DXF up to 24MB
Your files are safe, secure, and retain all intellectual rights.