# Counterboring Guidelines

Counterboring creates a flat-bottom recess for socket head cap screws and other machine screw heads.

Counterboring cuts a cylindrical, flat-bottom pocket around a hole so socket head cap screws (SHCS) and cylindrical machine screw heads sit flush or below the surface. Depth tolerance is &#x2A;*`+0.015" / -0.000"`** on all counterbores. For help choosing between tapered and flat-bottom seats, see [countersink vs counterbore](/blog/countersink-vs-counterbore).

::callout{color="primary" icon="i-ph-info-duotone"}
**Model counterbores directly in your STEP file** (they cannot be added from the hole operations selector). Any depth is supported when the body diameter and pilot diameter match one of the standard sizes below.
::

## Supported Counterbore Sizes

### Inch

| For screw size | Body dia. | Pilot dia. |
| -------------- | --------: | ---------: |
| #4             |  `0.206"` |   `0.128"` |
| #6             |  `0.244"` |   `0.154"` |
| #8             |  `0.288"` |   `0.180"` |
| #10            |  `0.330"` |   `0.206"` |
| 1/4"           |  `0.398"` |   `0.266"` |
| 5/16"          |  `0.491"` |   `0.328"` |

### Metric

| For screw size | Body dia. | Pilot dia. |
| -------------- | --------: | ---------: |
| M3             |  `6.0 mm` |   `3.5 mm` |
| M4             |  `7.5 mm` |   `4.5 mm` |
| M5             |  `9.0 mm` |   `5.5 mm` |
| M6             | `10.5 mm` |   `6.5 mm` |
| M8             | `13.5 mm` |   `8.5 mm` |

## Depth Tolerance and Weight Limit

- **Depth tolerance:*&#x2A; &#x2A;*`+0.015" / -0.000"`** on all counterbores.
- **Part weight limit:** **80 lbs** maximum ([maximum part size](/resources/guidelines/max-part-size)).